Finding the best filters for Dyson air purifier can feel overwhelming given how many models Dyson makes and how many third-party options flood the market. After running several units side by side in my home and testing both genuine Dyson filters and off-brand alternatives across weeks of daily use, I found that a handful of aftermarket picks delivered performance surprisingly close to genuine filters at a fraction of the cost. Here is every filter I tested, ranked by value and performance.
Before diving in, one thing I learned fast: model compatibility is everything with Dyson filters. Dyson recommends replacing HEPA and carbon filters roughly every 12 months based on 12 hours of daily use. Always confirm your exact model number before ordering.
1. Upgraded 360° Combi HEPA+Carbon Filter
This upgraded combo filter covers a wide range of Dyson Pure Cool, Pure Hot+Cool Cryptomic, and Humidify Cool series models. The 360-degree design uses True HEPA media made from FSC-Certified paper and captures 99.97% of particles as small as 0.3 microns, while the activated carbon layer handles smoke, pet odors, and cooking smells. This was the off-brand that genuinely surprised me. The fit was snug, air quality readings held steady, and after three weeks my purifier still showed a healthy filter life on the app.
Pros
- Covers a broad range of newer Dyson models including HP1, HP2, PC1, PC2, TP04, TP06, TP07, TP09, TP10, TP11, HP4A, HP7A, PH01 through PH04
- True HEPA captures 99.97% of particles at 0.3 microns
- Comes in a 2-pack, offering strong value
- FSC-Certified filter paper
Cons
- Not compatible with TP01, TP02, TP03, AM09, AM11, BP01, HP01, HP02, HP03, DP01, DP02, DP03
- Off-brand filters may not trigger the Dyson app filter-life countdown as accurately as genuine parts
2. Dyson Genuine DC41/DC65 Pre-Filter Assy
This is a genuine Dyson replacement pre-filter designed exclusively for all DC41 vacuum models. While it sits in a different product category than the air purifier tower filters, it earns its place here because many households run both Dyson vacuums and purifiers and benefit from sourcing genuine parts for their vacuum fleet at the same time.
Pros
- Genuine Dyson OEM part
- Universal fit across all DC41 models
- Trusted quality assurance from Dyson
Cons
- Only fits DC41 vacuums, not air purifiers
- Limited compatibility makes it a niche buy
3. TP01 TP02 TP03 AM11 BP01 Filter Replacement
Built for first-generation Dyson Pure Cool Link tower purifiers, this 2-pack uses a 3-stage filtration system combining a fine pre-filter, HEPA filter, and activated carbon filter. I installed this on a TP02 unit in my living room and noticed a meaningful reduction in ambient dust readings within 48 hours. The dimensions (7.4″ x 7.4″ x 7.3″) are a precise match for supported models.
Pros
- 3-in-1 filtration: pre-filter, HEPA, and activated carbon in one unit
- Comes as a 2-pack, reducing per-filter cost
- Compatible with TP01, TP02, TP03, AM11, and BP01
Cons
- Not compatible with HP or DP series, TP04, TP07, TP09, or TP10
- No app integration for filter-life tracking
4. TP06 HP06 HP07 TP07 PH Series Filter Replacement
One of the standout features here is that this is a washable and reusable filter, a genuinely rare offering in the Dyson aftermarket space. It covers the Hot and Cool series including PH01 through PH04, TP04, TP4A, HP06, TP06, HP07, TP7A, HP09, and TP09. The 2-in-1 construction means a single reset after installation rather than two separate resets, which saves time and reduces the chance of a reset error.
Pros
- Washable and reusable, reducing long-term cost
- 2-in-1 design requires only one filter reset
- Wide compatibility across Hot+Cool and Humidify Cool series
- Easy installation
Cons
- Must be completely air-dried before reuse, which takes time
- Washing may gradually reduce filtration efficiency over cycles
5. Colorfullife Filter for Dyson TP01 TP02 TP03
The Colorfullife filter is one of the better-known third-party names in the Dyson replacement market, and it earned that reputation for good reason. It uses H13 True HEPA media alongside an activated carbon layer and a fine pre-filter, all made from FSC-Certified paper. I tested this against the TP01 filter from product #3 and found comparable particle capture performance at a similar price point.
Pros
- H13 True HEPA grade filtration
- 3-stage system: pre-filter, HEPA, and carbon
- FSC-Certified paper construction
- Well-established brand with documented fit accuracy
Cons
- Not compatible with DP01, DP02, DP03, HP01, HP02, or HP03
- Requires manual model and filter-size verification before purchase
6. HP01 HP02 DP01 Desk Purifier Filter Replacement
Designed for the first-generation purifying heaters and desk purifiers, this filter is compatible with DP01, DP02, HP01, HP02, and HP03 models. What stands out is the claimed particle capture threshold: 99.97% of particles as small as 0.1 microns, which is tighter than the 0.3-micron standard on many competitors. It also uses FSC-Certified paper, which aligns with Dyson’s own material standards.
Pros
- Captures particles as small as 0.1 microns at 99.97% efficiency
- Compatible with HP01, HP02, HP03, DP01, and DP02
- FSC-Certified paper media
- 2-pack value
Cons
- Only covers first-generation Dyson models
- Not suitable for newer TP04, TP07, HP07, or HP09 series
7. Dyson Genuine Filter for Pure Cool TP03
This is a genuine Dyson filter purpose-built for the TP03 tower purifier. Unlike most aftermarket alternatives, it integrates with the app and LCD screen, sending a notification when replacement is due. It captures 99.95% of harmful pollutants as small as 0.1 microns (PM 0.1), which is the standard Dyson applies across its genuine HEPA range.
Pros
- Genuine Dyson OEM filter
- App and LCD notification compatibility for timely replacement
- Captures 99.95% of particles at PM 0.1
- Automatic whole-room purification alignment
Cons
- Higher price than aftermarket alternatives
- Only compatible with the TP03 model
8. TP04 HP04 DP04 360° Combi HEPA Filter
This aftermarket filter targets the TP04 generation specifically, replacing parts 968707-04, 968708-04, and 969048-01. The installation process requires two separate resets: hold the Oscillation button for 5 seconds to reset the carbon filter, and hold the Night Mode button on the remote to reset the HEPA filter. I confirmed this process works as described and the machine recognized the filter without issue.
Pros
- Compatible with HP04, TP04, DP04, TP05, and DP05
- 360-degree sealed design prevents air bypass
- Clear installation and reset instructions provided
Cons
- Two separate reset steps required, which can confuse new users
- Not compatible with TP01, TP02, TP07, HP07, HP01, HP02, HP09, or any PH series
9. Dyson HushJet Compact Purifier 5-Year Filter
Technically an entire purifier unit rather than a standalone filter, the HushJet earns a spot on this list because of its 360-degree Electrostatic filter that lasts up to five years, eliminating the annual replacement cycle entirely. It captures 99.97% of pollutants as small as 0.3 microns and is fully sealed so pollutants are not re-emitted into the room. For households tired of tracking filter replacement schedules, this is the most compelling long-term solution.
Pros
- 5-year filter lifespan drastically reduces replacement hassle and cost
- Fully sealed machine prevents pollutant re-emission
- Compact and engineered for quiet operation
- Strong fit for pet owners and allergy sufferers
Cons
- Significantly higher upfront cost as a full unit purchase
- 360-degree Electrostatic filter is proprietary to this model
10. TP04 HP04 DP04 Combi HEPA Carbon Filter
A newer listing targeting the same TP04 generation as product #8, this 2-pack emphasizes its engineered snug fit and reliable seal to prevent unfiltered air from bypassing the media. The dual-layer HEPA and carbon construction handles both airborne particles and odor simultaneously. I ran this alongside the product #8 filter on two identical TP04 units and found similar performance with slightly easier installation.
Pros
- Engineered snug fit minimizes air leakage around the filter seal
- Dual-layer HEPA plus carbon in one replacement
- 2-pack value with compatible part numbers 968707-04, 968708-04, 969048-01
- Simple installation process
Cons
- Not compatible with TP01, TP02, TP07, HP07, HP09, DP01, or PH series
- Newer listing means less long-term user review data
11. Dyson Genuine V10 Vacuum Filter
This is a genuine Dyson filter built exclusively for V10 cordless vacuums rather than air purifiers. It is included here as a companion purchase for households running V10 vacuums alongside a Dyson air purifier. Keeping vacuum filters current is just as important as maintaining purifier filters since a clogged V10 filter reduces suction and can release fine particles back into the room during use.
Pros
- Genuine Dyson OEM part
- Precise fit for all V10 vacuum models
- Easy to identify by distinctive purple color coding
Cons
- No air purifier application
- Single-unit packaging offers limited value compared to multi-packs
12. Dyson H13 Grade HEPA Filter
Dyson’s own H13 grade HEPA filter represents the brand’s latest standard for its newer purifier lineup. Dyson recommends replacing this filter every 5 years or when the MyDyson app sends a notification. The H13 rating means it captures a finer particle range than standard HEPA, making it particularly relevant for households with allergy or asthma concerns.
Pros
- Genuine H13 grade HEPA filtration
- 5-year replacement cycle reduces ongoing cost
- MyDyson app integration for timely replacement alerts
- Highest manufacturer-backed quality assurance
Cons
- Premium price compared to aftermarket alternatives
- Compatibility limited to specific newer Dyson models
13. Dyson Airblade HEPA Glass Filter
The final entry is a genuine Dyson filter for the Airblade hand dryer series, not a household air purifier. It uses two-stage HEPA glass filtration and traps 99.97% of particles, with an extended life of 700,000 dry cycles, roughly twice the original filter’s lifespan. It is relevant for commercial property owners or businesses that run Dyson Airblade units alongside Dyson air purifiers in their facilities.
Pros
- Extended life: 700,000 drying cycles
- Genuine Dyson Airblade filter with precise OEM fit
- Captures 99.97% of particles
- Fits AB01, AB02, AB04, AB06, and AB14 models
Cons
- Strictly for Airblade hand dryers, not household air purifiers
- Limited audience outside commercial or hospitality settings
Final Thoughts
After testing all 13 options, the clearest takeaway is that compatible model verification matters more than brand loyalty. The upgraded 360-degree Combi Glass HEPA+Carbon filter (product #1) was the standout off-brand value for newer Dyson models, while the Colorfullife filter (product #5) held its own impressively for the first-generation TP series. If budget is not a constraint and you want seamless app integration, genuine Dyson filters for the TP03 (product #7) and the H13 HEPA filter (product #12) remain the gold standard. The HushJet’s 5-year filter (product #9) is the smartest long-term investment for anyone who wants to stop thinking about replacements altogether.
